« Fiddle, Fiddle | Main | Cue the AC/DC »

May 05, 2006

I Am Router, Hear Me Roar

router0505.jpg

Behold the new router, a Linksys Wireless-G Broadband Router With 4-Port Switch (I'm reading off the label in front). I determined that the former router had, in fact, fried its litle routing brain out, and took the opportunity to upgrade. The old router was 802.11b capable and this one is 802.11g capable, and that's six letters better. And I'm not entirely sure how you can beat that. I don't think you can. Well, there's always 802.11n, but they haven't finalized that standard yet, and anyway, it's not like I'm streaming hi-def movies from my PC to my laptop. I just want to be able to see teh Intarweebs on all my computers. 802.11g is just fine, thanks.

I do feel marginally competent that I was able to install the router and a couple of additional adapter with almost no pain, but it really has more to do with the set-up software doing all the heavy lifting and me clicking a button here and there (and even hardly that on the Mac). It's come to a point where there's no geek pride in doing this stuff. And you know what? I'm good with that. No headaches, it just works. That's progress.

Posted by john at May 5, 2006 03:18 PM

Trackback Pings

TrackBack URL for this entry:
http://www.scalzi.com/mt2/mt-tb.cgi/3784

Comments

JonathanMoeller | May 5, 2006 03:47 PM

Routers, especially personal ones, go bad all the time. When I did phone support, I used to have conversations like this every hour or so.

Customer: "My Internet won't work. Bastard!"

Me: "Try plugging your modem directly into the computer."

Customer: (much grumbling and grunting) "Hey...it works!"

Me: "Routers sometimes go bad."

Customer: "Those bastards!"

Nowadays, the things are almost cheap enough to be disposable.

John Scalzi | May 5, 2006 04:00 PM

This particular router lasted for three years, so I won't complain.

Bill Bradford | May 5, 2006 04:26 PM

If that's a WRT54G v5, I'm sorry.

If it's a V4 or earlier, check out http://www.dd-wrt.com for a much-improved replacement firmware to replace the factory Linksys stuff.

(look on the bottom to see the version number)

Bobarino | May 5, 2006 06:54 PM

As a consumer, I've found 2 or 3 years to be the lifetime of a router, and I'm OK with that. But the electrical engineer in me wonders why they don't work indefinitely. I suspect there's some really marginal design in most of these things, with the goal of reducing the cost to the absolute minimum while producing a product that outlasts the warranty period.

Brian | May 5, 2006 09:34 PM

Speaking as a current WRT-45G v5 owner, per Bill's post I've definitely had the occasional gripe with mine... every so often, the thing just decides it doesn't like communicating wirelessly and drops anybody connected over the air. I've found that rebooting the router and reconnecting things in a particular sequence is the best fix:

  1. Unplug router power
  2. Unplug network cable between router and cable/DSL modem from the router
  3. Plug router power back in
  4. Wait until 'WLAN' light on router lights back up. If light stays steadily on, start over from step 1.; if light blinks rapidly, continue to next step
  5. Plug network cable back into the router
  6. Check network connection on any wirelessly connected computer

Usually works, though sometimes getting the computers to realize they're back on the network takes a minute or two of coaxing.

And yes, I bought the WRT-45G without Googling for reviews because it was cheap, and there was a $10 rebate. Blinded by greed and convenience, I suppose.

JimW | May 5, 2006 10:34 PM

I've been unable to find the answer elsewhere, so since we're on the subject...what is the difference between a router with 1 antenna and one with 2?

Billy Hollis | May 5, 2006 11:19 PM

4 years on my last Linksys, which died only a couple or three weeks ago. Actually, I went through the whole experience for my own readers.

I got the newer Linksys (WRT54GX2), which offers better range and signal strength. A few settling in difficulties, but OK now, and the signal strength and connect speed are a quantum leap over that 802.11b Linksys. Especially if get the adapter with the battle-droid antenna...

Brian | May 6, 2006 12:39 AM

I believe the double antenna is supposed to boost reception/signal strength, but I haven't a clue if it actually does help.

John H | May 6, 2006 10:44 AM

Since you own such a big piece of land you don't even have to worry about going crypto. You can just plug it in and go.

I usually recommend to people in tighter living conditions (neighbors within 100' of their house) to take the extra step of turning on encryption and turning off broadcasting. I wouldn't mind someone 'borrowing' my bandwidth from time to time, but not at the expense of having my computer open to the world...

Jeff Porten | May 9, 2006 12:24 AM

The dual antenna is primarily to allow you to shape the signal; you can sometimes extend range by wiggling around the bunny ears. It's exactly as scientific as it used to be on your TV set.

The best way to boost your signal is to boost the signal strength -- one way is with a pricey external antenna. Another is with a 3rd-party firmware hack. FCC regulations limit the maximum power you can pump through your router, but most commercial hardware is way below this ceiling.

Or you can Google for "yagi Pringles antenna" and build your own for about 10 bucks.

I recommend running encryption even if you are on a huge tract of land (apologies to Monty Python) -- with a directional antenna, you can tap a wifi network at a distance of 20 miles if you have line of sight. Sure, you probably don't need to be paranoid, but why take chances? (On the other hand -- advance bootleg copies of The Lost Colony. Woo hoo!)

Michael Taylor | July 29, 2006 08:37 PM

I sure wish they'd standardize that 802.11n... I saw the newest Linksys interpertation of "draft n" in a Circuit City (wrt300n) - and it looks like it should be mounted atop a lobster boat.

Post a comment.

Comments are moderated to stop spam; if your comment goes into moderation, it may take a couple of hours to be released. Please read this for my comment moderation policies.
Preview will not show paragraph breaks. Trust me, they're there.
The proprietor generally responds to commenters in kind. If you're polite, he'll be polite. If you're a jackass, he'll be a jackass. If you are ignorant, he may correct you.
When in doubt, read the comment thread rules.




Remember Me?

(you may use HTML tags for style)